The La Leche River at Quebrada Hualtacal, Lambayeque, Peru.

The U.S. Army Corps of Engineers HEC-RAS model (Version 4.0) can perform three functions: (1) steady flow, (2) unsteady flow, and (3) movable boundary flow. The steady flow component uses the standard step method for the solution of steady gradually varied flow.1 The unsteady flow component uses a numerical solution of the equations governing gradually varied unsteady flow in open channels. The movable boundary component uses the sediment continuity and one of several sediment transport equations to calculate river bed aggradation/degradation.

• When should unsteady flow be used?

This question is of considerable practical interest, since unsteady flow is significantly more complex and requires more data than steady flow. However, the answer is not straightforward, requiring some elaboration.

Under steady flow, the user inputs as boundary conditions a discharge upstream and a stage downstream. The model calculates stages throughout the interior points, keeping the discharge constant. Under unsteady flow, the user inputs a discharge hydrograph at the upstream boundary and a discharge-stage rating at the downstream boundary. The model calculates discharges and stages throughout the interior points.

Under steady flow the discharge-stage ratings are unique, i.e., kinematic. On the other hand, under unsteady flow the model itself calculates (dynamic) looped discharge-stage ratings according to the variabilities of the flow. Therefore, the specification of a unique discharge-stage rating at the downstream boundary contradicts the solution at that boundary.2 The model cannot be kinematic at the downstream boundary and dynamic everywhere else!

A way out of this difficulty is: (1) to move the downstream boundary further downstream, (2) to specify the unique discharge-stage rating at the artificial downstream boundary, and (3) to let the model itself calculate the looped ratings at the interior points, including the point where the real downstream boundary is located.3 Despite its apparent artificiality, this procedure works well and circumvents the need to know the discharge-stage rating (at the downstream boundary) before it is calculated.

• Kinematic vs dynamic waves

The decision to use unsteady flow will depend on whether the wave to be modeled is kinematic or dynamic. If the wave is kinematic, (1) the discharge will not vary in space; (2) the discharge-stage ratings will be unique; and (3) the downstream boundary can be specified as unique. In this case, the solutions of steady and unsteady flow are essentially the same; therefore, the unsteady flow calculation is not needed.

On the other hand, if the wave is dynamic, (1) the discharge will vary in space, attenuating as it moves downstream; (2) the calculated discharge-stage ratings will not be unique; and (3) for better accuracy, the downstream boundary should be artificially moved downstream to allow for an unsteady looped rating to develop at the real downstream boundary. In this case, the unsteady flow calculation is justified, assuming of course, that the wave is truly dynamic.

• Use of unsteady flow in channel design

This situation begs the question of whether a certain flood wave can be construed as either kinematic or dynamic. Or, better yet, whether a dynamic wave should be used at all to determine stages in the design of channel improvement projects. On typical projects, of limited channel lengths, a kinematic wave, which keeps its discharge constant, is a better assumption than a dynamic wave, which attenuates its discharge. Indeed, the kinematic wave assumption assures that the channel will contain all waves, kinematic or dynamic. Viewed in this light, the use of a dynamic wave for the calculation of stages in the design of channel improvements projects does not appear to be warranted.

1 Chow, V. T. (1959). Open-channel hydraulics. McGraw-Hill.
2 Abbott, M. (1976). Computational hydraulics: A short pathology. Journal of Hydraulic Research, Vol. 14, No. 4.
3 Ponce, V. M. and A. Lugo. (2001).
Modeling looped ratings in Muskingum-Cunge routing. ASCE Journal of Hydrologic Engineering, Vol. 6, No. 2, March/April, 119-124.